How to Hang a Mystical Archive Wall Scroll

Quick answer

Hang your Mystical Archive Wall Scroll by choosing a stud or using a drywall anchor, then gently hang the scroll by its cord from a single hook or nail.

Steps to hang your wall scroll

1. 1. Prepare the wall: Locate a wall stud using a stud finder, or install a drywall anchor rated for at least 5 lbs. A simple nail or screw hook works if it's in a stud. Never rely on a pushpin or adhesive strip—the scroll's weight can pull it down.
2. 2. Attach the hanging hardware: Drive a small nail or screw hook into the stud or anchor, leaving the head about 1/4 inch out so the scroll's cord can loop over it. Make sure the hook is level; an uneven hook will make the scroll hang crooked.
3. 3. Hang the scroll: Gently lift the scroll by its top rod and loop the hanging cord over the hook. Adjust the cord so the scroll hangs evenly—the cord should sit in the center of the hook. If the scroll tilts, slide the cord left or right on the hook to balance it.
4. 4. Check the alignment: Step back and look at the scroll from a few feet away. If it's crooked, lift it off and adjust the cord position. Re-hang and check again. A small adjustment of 1/4 inch can fix a noticeable tilt.
5. 5. Final touch: Gently straighten the bottom rod so the fabric hangs flat. Avoid pulling the fabric—it's meant to drape naturally. Do not iron or steam the scroll; the fabric can be damaged by heat.

What you need

• Revitalize Mystical Archive Wall Scroll For Magic The Gathering: The Revitalize Mystical Archive Wall Scroll features rods and a hanging cord in black, with the UP logo on collapsible rod ends to verify authenticity. The built-in cord and rod system means you don't need extra hardware to hang it—just a single hook or nail is enough.